| 1. | Hydraulic model test of spillway in baiyinhua reservoir
白音花水库溢洪道水工模型试验研究 |
| 2. | To choice good excavating scheme , this article engages in hydraulic model tests and numerical simulation on the movable bed
为了选择较好的清挖方案，本文对太平湾电厂下游河道进行了动床水力模型试验及动床水流数值模拟研究。 |
| 3. | In view of this problem , this paper curries out serials of hydraulic model test to fine out the mechanism of effect of roughened apron extension upon energy dissipation and erosion control
因此，本论文针对这一问题，进行了一系列水工模型试验以分析研究海漫加糙对消能防冲影响的机理。 |
| 4. | For each approach , a much more thorough study was made on the hydraulic characteristics of the side - inlet sump by the hydraulic model test and the numerical simulation
对每一种技术方案，应用数值模拟试验与水力物理模型试验相结合的研究方法，全面细致地研究了侧向进水集水池的水力特性。 |
| 5. | The flow regime , sediment deposition and the loss of head of two head tanks of the sewage pumping station with different dimensions are studied by using a hydraulic model test method
摘要采用水力模拟的方法对两个不同结构尺寸的污水泵站高位井的水流流态、泥沙淤积及水头损失等进行了模型试验。 |
| 6. | The influence of the area contraction ratio of rotary flow generator on the hydraulic characteristics of level rotary flow has been investigated by the hydraulic model test of an internal energy dissipation tunnel
摘要通过模型试验，研究了起旋器出口面积收缩率对水平旋流泄洪洞水力特性的影响。 |
| 7. | Based on the hydraulic model test of zhaojiabang pumping station in shanghai , a much more thorough study was made on the hydraulic and sediment deposition characteristics in this paper
本文结合上海市肇嘉浜雨污水合建式泵站水力模型试验研究课题，对大型多机组泵站圆形集水池的水力特性和泥沙淤积特性进行了较全面的研究。 |
| 8. | This study collected and discussed the results of three hydraulic model tests of long period oscillations in hwa - lien harbor , conducted by center of harbor and marine technology in 1996 , 1997 and 2000
摘要本文综合港湾技术研究中心于1996 、 1997及2000年所执行有关花莲港港池振荡的研究计画水工模型试验成果部份，进行汇整及讨论。 |
| 9. | The researches including discharge capacity , pressare properties , cavitation characteristics at some key positions , hoisting load of the gate , configuration of energy dissipator at the exit dentated - sill , and downstream scouring were performed by hydraulic model tests
借助系列水工模型试验对水布垭放空洞的泄流能力、压力特性及关键部位的空化特性、闸门启闭力、出口鼻坎消能工体型及下游冲刷等进行了较深入的研究、分析。 |
| 10. | By the hydraulic model test the application feasibility of the roller bucket with low - ridge was demonstrated . comparing the hydraulic calculation data and operation rusultes , the article made some summarise . the principle of mixed flow for energy dissipation design has been well vertified through the study results
本文主要通过对某电站水利枢纽下游消能防冲的水力计算和整体模型、断面模型的试验分析，验证了低鼻坎戽流消能在此类工程中应用的可行性。 |
